Care + Storage - Zeitlos 266EH011020HD Mode D'emploi

Changing the incli-
nation angle of the
backrest
(see figure C)
You can adjust the backrest
to 7 different positions in to-
tal.
Please note!
– Do not lean against the
backrest while adjusting
the inclination angle. Jerky
movements of the back-
rest may cause you to lose
your balance. When the
armrests engage into the
locking devices, there is a
risk of being crushed.
1. Disengage the armrests 7
from the locking devices 8.
2. Let the armrests 7 lock
back into the locking devic-
es 8 at the desired position
of the backrest 2.
Folding up the chair
1. Disengage the armrests 7
from the locking devices 8
(see figure C).
2. Disengage the guide roll-
ers 4 of the rear crossbar 3
of the seat 1 from the artic-
ulated joint 6 on both sides
(see figure D).
3. Fold the chair up at the
seat 1 and backrest 2 (see
figure E).

Care + storage

Maintaining the chair
We recommend to treat the
coated aluminium frame with
car wax every six months.
This will make the coating
last longer and make it eas-
ier to remove dirt and other
deposits.
Check the screwed connec-
tions regularly and tighten
them if necessary.
Cleaning the chair
Aluminium is a complete-
ly weather-proof material.
However, dirt and other de-
posits may accumulate on
the material through expo-
sure to the elements.
Please note!
– Cleaning the chair with un-
suitable cleaning utensils
and agents could irrepara-
bly damage the surfaces.
– Do not use any abra-
GB
11