Safety Instructions - Ferm Industrial CDM1142P Traduction De La Notice Originale

Cordless Li-Ion Impact driver 20V
CDM1142P
Thank you for buying this Ferm product. By doing
so you now have an excellent product, delivered
by one of Europe's leading suppliers. All products
delivered to you by Ferm are manufactured
according to the highest standards of
performance and safety. As part of our philosophy
we also provide an excellent customer service,
backed by our comprehensive warranty. We hope
you will enjoy using this product for many years
to come.

1. SAFETY INSTRUCTIONS

Read the enclosed safety warnings,
the additional safety warnings and the
instructions. Failure to follow the safety
warnings and the instructions may result in
electric shock, fire and/or serious injury. Save the
safety warnings and the instructions for future
reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Risk of electric shock
Variable electronic speed
Rotation, left/right
Do not use in rain
Indoor use only
Class II machine - Double insulation - You
don't need any earthed plug.
4
Max temperature 40
Do not throw the battery into fire
Do not throw the battery into water
Do not dispose of the product in
unsuitable containers.
Separate collection for Li-ion battery.
T2.0A
Time-lag miniature fuse-link
The product is in accordance with the
applicable safety standards in the
European directives.
Additional safety warnings for drills
and screw drivers
Drill safety warnings
a) Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
b) Hold the power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting
a "live" wire may make exposed metal parts
of the power tool "live" and could give the
operator an electric shock.
c) Brace the tool properly before use. This tool
produces a high output torque and without
properly bracing the tool during operation, loss
of control may occur resulting in personal injury.
Safety instructions when using long drill bits
a) Never operate at higher speed than the
maximum speed rating of the drill bit.
At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting the
workpiece, resulting in personal injury.
b) Always start drilling at low speed and with
the bit tip in contact with the workpiece.
At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting the
workpiece, resulting in personal injury.
C
0