Publicité
Les langues disponibles
Les langues disponibles
CINEMA™ GLASS SERIES - NEFB27HG-3A
Framing
Prepare rough-in-framing according to the recommended dimensions in Figure 1. Prepare corner rough-in-framing according to the
recommended dimensions in Figure 2.
Select a location that is not prone to moisture and is located at least 36" (91.4cm) away from combustible materials such as curtain
drapes, furniture, bedding, paper, etc.
Fig. 1
10"
A
(254mm)
A.
Once the rough opening has been prepared and the power has been routed to the right side of the recess, the appliance may
be installed.
B.
The electrical connection must be made prior to placing the appliance into position (see "hard-wiring installation" section).
Clearances
Minimum Mantel Clearances
WARNING
!
•
When using paint or lacquer to fi nish the mantel, the paint or lacquer must be heat resistant to prevent discolouration.
TOP OF APPLIANCE
Product information provided is not complete and is subject to change without notice. Please consult the installation manual for
the most up to date installation information.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada •
18 1/4"
(46.3cm)
C
FLOOR
+F
(Or mantel base thickness)
F
26"
B
(66cm)
31 1/2"
K
(80cm)
B
J
Fig. 2
1(866)820-8686
•
www.napoleon.com
31 1/2"
L
(80cm)
W415-2376 / 08.13.19
Publicité
