ALPATEC MG 2.1 Mode D'emploi page 10

notice MG2.1-06 20/04/06
Step 1: how to fill water.
• Manual mode: Place switch (10) in Manuel position (MAN). Take the water tank (1) and fill it with fresh
potable water. Fill between MIN and MAX and never exceed MAX level. Put back the tank.
• Automatic mode: Place switch (10) in Auto position. Unscrew knob on connection (11). Connect pipe (12) to
the ice maker on water tap connection (11) and then to the domestic water tap. Open domestic water tap.
Step 2: electrical connection.
Plug the ice maker. Press M/A switch. The warning light flash and a sound can be heard. In manuel
mode, when the warning light turns to green colour, ice maker is ready to work.
In automatic mode, the warning light flash and a sound can be heard as long as the water tank is empty.
Please refer to following instructions.
Step 3: size of the cubes.
Select the size using the mode switch.
- small ice cube : on the situation of normal waiting, small ice cube light indicator will be lightened.
Press START button to start the program. The appliance makes ice cube by 10 minutes period*.
- Medium ice cube : on the situation of normal waiting, press mode button to select medium ice
cube size (the indicator will be lightened), then press START button to start the program. The
appliance makes ice cube by 15 minutes period*.
- Big ice cube : on the situation of normal waiting, press mode button to select big ice cube size
(the indicator will be lightened), then press START button to start the program. The appliance
makes ice cube by 18 minutes period*.
* First rounds may be a little larger longer and with less than 14 cubes.
• Changing the ice cube size :
While the machine is running, press the PAUSE button (the indicator of the current size will flash for 30s
then the running light indicator will flash till the end of the round). Wait for the end of the round, the
machine stops working. Select the new cube size (see below) and press the START button.
Changing the cube size is also possible in the begining of a round. Press the PAUSE button, the indicator
of the current size will flash. Immediately select the new size with the MODE button and press again the
PAUSE button. Rounds restart with the new size.
Note: ice cube size is related to ambient temperature. In order to avoid any problem, we suggest you use
small size if ambient temperature is between 16°C and 20°C, medium size if ambient temperature is
between 21°C and 26°C and large size if ambient temperature is over 26°C.
If you choose different size, please ensure that all the cubes are ejected at the end of the round.
Step 4: how to stop the appliance
During the last round, press the PAUSE button (the indicator of the current size will flash for 30s then the
running light indicator will flash till the end of the round). Wait for the end of the round, the machine
stops working. Press the ON/OFF button.
12:11 Page 10
USING
USING
10