Step Switch; Heating Pad - ProfiCare PC-SNH 3097 Mode D'emploi

NOTE:
Unusual smells may occur during the first use. These are
harmless and disappear the more the appliance is used.

Step Switch

You can choose the following settings:
Setting Function
0 Off
Low. Light heat.
1
WARNING:
• Pull the plug out of the socket before each time you clean the
appliance.
• Only clean the appliance when it is cool. Risk of burns!
• Do not submerge the heating pad with the step switch in water!
This could lead to an electric shock or a fire.
CAUTION:
• Do not use any strong cleaning agents or solvents.
• Please note the care instructions on the labels!

Heating Pad

1. First remove the plug from
the electricity supply.
2. The heating pad can be
washed in the gentle cycle
at max. 40 °C.
Use a mild detergent and
follow the instructions
of the manufacturer on
amount of detergent.
CAUTION:
• Keep in mind that the heating pad must not be
dry-cleaned, nor must it be wrung out, dried in the
dryer, or ironed.
38
PC-SNH3097_IM
Setting
2
3
NOTE:
You can identify the setting using the indicator light.
Switching Off
1. Set the step switch to 0 (off).
2. Only then pull the plug out of the wall socket.
Cleaning
CAUTION:
• Keep in mind also that frequent washing places
strain on the heating pad. For this reason, the heat-
ing pad should only be washed 5 times in a washing
machine during the course of the pad's service life.
Accordingly, we recommend that you only wash the
heating pad by hand.
3. Restore the heating pad to its original dimensions im-
mediately following washing, and leave it spread out flat
over a clothes rack to dry.
CAUTION:
Do not use clothes pins or similar objects to fasten the
heating pad to the clothes rack. Otherwise, the heating
pad may become damaged.
Function
Medium
High
27.04.21