Table Des Matières; English - x-sense XP01 Mode D'emploi

Contents
English
Deutsch
Français
Español
Italiano

English

This user manual contains important information about your combination smoke &
carbon monoxide alarm's operation. To ensure proper use and trouble-free operation,
please read this manual carefully and store it in a safe place for future reference.
Introduction
All X-Sense combination smoke & carbon monoxide alarms conform with regulatory requirements,
including EN 14604 & EN 50291 standards and are designed to detect both smoke and carbon
monoxide.
01-15
This unit adopts photoelectric technology to detect smoke which is generally more sensitive than
ionization technology. It is eff ective at detecting large particles, which tend to be produced in greater
amounts by smoldering fi res and may smolder for hours before bursting into fl ame. Sources of these
16-31
fi res may include cigarettes burning in couches or bedding.
Carbon monoxide (CO) is odorless, tasteless and invisible - it's a silent killer. Using electrochemical
32-48
sensing technology, this unit can detect increased levels of carbon monoxide early, protecting your
family from the dangers of carbon monoxide.
49-64
• The installation of the apparatus should not be used as a substitute for proper installation, use and
maintenance of fuel-burning appliances including appropriate ventilation and exhaust systems.
65-81
• This apparatus is to be installed by a competent person.
• It is not tested for use in a caravan or boat.
Note: For maximum protection, use smoke & CO alarms on each level and in every bedroom of your
home.
NEVER IGNORE THE SOUND OF THE ALARM!
Determining what type of alarm has sounded is easy with your X-Sense combination smoke & carbon
monoxide alarm. The alarm sounder will inform you of the type of situation occurring.
01