beautyrest Advanced Motion Base Manuel Du Propriétaire page 6

safety precautions and usage statements
IMPORTANT DO'S AND DON'TS
DO:
• Plug your adjustable base into a power surge protector.
• Evenly distribute weight when sleeping in a split setup. Uneven
distribution of weight can cause the base to raise unevenly.
• Call Customer Service for any technical issues. Do not try to force
the base down, this can damage the motors or frame.
• Use mild soap and water to clean your adjustable base if staining
occurs.
• Keep in mind that adjustable bases are recommended to be used
with adjustable friendly mattresses.
• Lower to the flat (horizontal) position after use and in between
presets.
• Register your warranty as soon as your adjustable base has been
delivered.
DON'T:
• Sit on corners/edges of base, this may warp the frame, struts or
foam.
• Tilt the base on its side. This can damage the legs and/or leg
screws.
• Stand or jump on the adjustable base at any time, this can damage
the frame and motors.
• Drag the base to move it. Dragging the base could damage the
frame, strip the nut/bolts or break the legs. Purchase castors if you
plan on moving your base routinely.
• Enter and exit the adjustable base with the head and/or foot in
the articulated position. Enter or exit your adjustable in the flat
(horizontal) position.
• Tinker with or modify base. This will void the warranty.
• Press down on the head or foot while actuated can damage frame
and motors.
4
FCC Compliance:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
To comply with the FCC RF exposure requirements, no
change to the antenna or the device is permitted. Any
change to the antenna or the device could result in the
device exceeding the RF exposure requirement and void
user's right to operate the device.
Radio Frequency: 2.4 GHz
SAVE THESE INSTRUCTIONS.