Use Instructions - Yutrax TX103 Mode D'emploi

YUTRAX offers a full line of ATV accessories. We
appreciate your purchase of one of our world class ATV
Ramps. Follow these few simple instructions and your
product will be sure to give you many years of trouble
free pleasure. Instructions should be kept in a safe place
and reviewed at least annually.
If for any reason you have a problem with your product,
Do NoT return to the retailer; contact the YUTRAX
customer service department at 800-345-6007 Monday
through Friday from 8 a.m. to 5 p.m. CST for assistance.
ASSEMBLY INSTRUCTIONS:
1. Attach the two provided securing straps to the third
cross tread from the tailgate end (one on each side of
ramp). Wrap the loop end of each strap around the
cross tread and thread the buckle and "S" hook end
thru the loop. This permanently attaches straps to the
ramp. SEE fIgURE 1.

USE INSTRUCTIONS:

TO LOAD YOUR 4-WHEELED ATV:
1. On level ground, open ramp completely and rest on
tailgate. SEE fIgURE 2. Be sure ramp is centered on
tailgate.
. Hook the "S" hooks of both straps to bumper and pull
on loose end of straps until straps are tightly holding
ramp to tailgate. To remove, simply push the thumb
release on strap buckle.
3. Using an electric or manual winch, draw the ATV up
the ramps. Do NoT drive the ATV up the ramps.
4. Once vehicle is in truck bed, be sure to set brake
& securely tie down vehicle. Ramp can now be
removed, folded up, and stored.
TO UnLOAD YOUR 4-WHEELED ATV
1. Reverse loading procedures to unload your ATV.
tailgate
s-hook
bumper
Figure 1
Page 
TX103 and TX196 Aluminum Tri-fold ATV Ramp
READ, UNDERSTAND AND follow All ASSEMBlY,
INSPECTIoN, & USE INSTRUCTIoNS PRoVIDED
BEfoRE EACH USE. fAIlURE To follow All
INSTRUCTIoNS, wARNINgS & loAD CAPACITY RATINg
CoUlD RESUlT IN SERIoUS INJURY oR DEATH.
If ANY INSTRUCTIoNS ARE NoT UNDERSTooD oR If
YoU HAVE A PARTS ISSUE CAll 800-345-6007 BEfoRE
USINg.
Do NoT USE AN ATV oN THIS RAMP If THE ATV HAS SNow
CHAINS oN TIRES. CHAINS wIll CAUSE DAMAgE To YoUR
RAMP AND IS HAZARDoUS!
BE CAREfUl of PINCH PoINTS AT RAMP HINgE
loCATIoNS.
BE CAREfUl of PINCH PoINTS AT RAMP TAB loCATIoNS
wHIlE SECURINg RAMP To TAIlgATE.
THIS RAMP IS foR USE wITH 4-wHEElED ATV'S oNlY. Do
NoT USE wITH 2- oR 3-wHEElED VEHIClES EXCEEDINg
1,500 lBS. wITH TX196 RAMPS oR 1,750 lBS. wITH TX103
RAMPS.
SAfETY STRAPS MUST BE SECURElY HooKED UP To VEHIClE
To PREVENT RAMPS fRoM SlIDINg off TAIlgATE. TEST
BEfoRE USINg oR YoU CoUlD BE SERIoUSlY INJURED.
BE SURE YoUR TRUCK IS IN PARK AND EMERgENCY BRAKE
ENgAgED.
BE SURE 4-wHEElED ATV IS CENTERED oN RAMP. Do NoT
USE wITH ANY VEHIClE THAT HAS wIDER TIRES THAN THE
RAMP wIDTH.
MAXIMUM USABlE HEIgHT, gRoUND To loADINg
PoSITIoN, IS No MoRE THAN oNE HAlf THE lENgTH of
THE RAMP.
BE SURE RAMP IS PRoPERlY PlACED AND SECURED AS
DESCRIBED IN loADINg INSTRUCTIoNS.
Do NoT USE oN SofT SURfACES oR UNlEVEl TERRAIN.
Do NoT EXCEED THE CAPACITY of YoUR loADINg
SURfACE (I.E. TAIlgATE, BUMPER). If UNKNowN,
CoNSUlT THE MANUfACTURER To fIND loAD
CAPACITIES.
If loADINg oR UNloADINg fRoM A TRAIlER, MAKE
SURE THE TRAIlER IS PRoPERlY CoUPlED To THE
Tow VEHIClE.
NEVER STAND IN THE PATH of EqUIPMENT wHEN
loADINg/UNloADINg wITH THE RAMP, AND KEEP
BYSTANDERS AwAY fRoM THE RAMPS.
Do NoT STEP BETwEEN RUNgS. THIS MAY CAUSE A
PERSoN To fAll THRoUgH AND PoSSIBlY RESUlT IN
SERIoUS BoDIlY INJURY.
RAMPS ARE INTENDED foR loADINg/UNloADINg
EqUIPMENT oNTo A TRAIlER oR PICKUP TRUCK. Do
loop
NoT USE RAMP SECTIoNS AS A lADDER, BRIDgE,
SCAffolDINg, oR foR ANY oTHER PURPoSE.
Check for parts online at www.yutrax.com or call 800-345-6007 M-F 8-5 CST
WARNING
Owner's Manual