Description; Technical Specifications; Installation; Equipment Off Loading And Inspection - MW TOOLS LA1801 Mode D'emploi

M1.1.LA1801.NLFREN 14082018
EN
2.1 DESCRIPTION AND OPERATION

2 Description

The fume extractor is designed to provide high efficiency filtration of fume generated during welding processes.
The fume extractor is designed to provide high efficiency filtration of fume generated during welding processes. Contaminants
contaminants are captured at the source through the extraction arm hood, clean air is then recirculated back to the
are captured at the source through the extraction arm hood, clean air is then recirculated back to the working area. Figure 1
working area. figure 1 illustrates the basic operation and identifies the key components of the system.
illustrates the basic operation and identifies the key components of the system.
When the pressure drop remains consistently above 4 ̋ , or the generated airflow can no longer suitable capture the weld
When the pressure drop remains consistently, or the generated airflow can no longer suitable capture the weld fume, the filter
should be replaced.
fume, the filter should be replaced.
Figure 1 Description
FIGURE 1 General Product Operation

3 Technical specifications

Model
Power supply
Power
Air flow
Sound level
Arm length
Arm diameter
Dimensions (l x w x h)
Protection class

4 Installation

The fume extractor is portable system that can be configured with multiple accessories to serve various application requirements.
Please refer to the proper section when installing your system.

4.1 Equipment off loading and inspection

Upon receipt of your unit, visually inspect for any shipping damage. A damaged carton indicates that the equipment may have
received rough handling during shipping that may have caused internal damage which could cause your system to not function
properly. Notify your delivery carrier and enter a claim if any damage is found.
It is recommended to leave the unit secured to the shipping skid if the use of a skid loader or fork truck is required to deliver the
unit to the point of delivery or installation. It is not recommended to pick the fume extractor up with a fork truck after it has been
removed from the skid.
LA1801
230 V / 50 Hz
1.1 kW
2000 m³/h
70 dB(A)
3000 mm
150 mm
520 x 520 x 1350 mm
IP54
11