Configuration Menu - Zafferano Sister Light Mode D'emploi

The configuration menu involves four suc-
cessive setting steps:
1) Default luminosity
2) Colour temperature (dynamic white)
3) Dimmer ON / OFF function
4) Call to table ON / OFF function
0 - 1 sec
1)
Quickly press the touch sensor to change the luminosity of
the lamp
0 - 1 sec
1)
Quickly press the touch sensor to change the colour
temperature of the lamp
0 - 1 sec
1)
Quickly press the touch sensor to set the dimmer function
to ON (permanent red LED) or OFF (flashing red LED)
0 - 1 sec
1)
Quickly press the touch sensor to set the call to table fun-
ction to ON (permanent blue LED) or OFF (flashing blue LED)

CONFIGURATION MENU

TO ACCESS THE MENU (first step)
When the lamp is switched off, press
lightly for 7 seconds until it flashes
red/blue (3 times)
STEP 1 - DEFAULT LUMINOSITY
100%
6%
60%
30%
STEP 2 - COLOUR TEMPERATURE (K)
dynamic white
STEP 3 – DIMMER (RED LED)
STEP 4 - CALL TO TABLE (BLUE LED)
For more information and updates visit our website
NOT PRODUCED IN ITALY - IMPORTED BY
Zafferano srl, Viale dell'Industria, 26 - 31055 Quinto di Treviso - TV - Italy
www.zafferanoitalia.com
7 secs
3 seconds to switch off the lamp
1 - 2 secs
2a)
SAVE AND CONTINUE TO STEP 2
Press lightly for 1-2 seconds until a flash appears
2b)*
1 - 2 secs
2a)
SAVE AND CONTINUE TO STEP 3
Press lightly for 1-2 seconds until a flash appears
2b)*
1 - 2 secs
2a)
SAVE AND CONTINUE TO STEP 4
Press lightly for 1-2 seconds until a flash appears
2b)*
1 - 2 secs
2a)
SAVE AND CONTINUE TO STEP 1
Press lightly for 1-2 seconds until a flash appears
2b)*
3 secs
2b)*
SAVE AND EXIT MENU
From any level, press lightly for
7