Box Contents; Introduction; Intended Use; Indications For Use - ChoiceMMed MDTS100 Manuel D'instructions

1 Box Contents

ChoiceMMed Electronic Pulse Stimulator MDTS100 *1
Lead Wires with Pin Connection *2
AAA Batteries *2
Electrode Pads *4
User Guide *1

2 Introduction

The MDTS100 Electronic Pulse Stimulator device has seven stimulation modes: Mode1, Mode2,
Mode 3, Mode 4, Mode 5, Mode 6, Mode 7. These stimulation modes can be selected by
pressing the MODE button on the front of the unit.
The MDTS100 comes with 2 independent output channels (A&B). Each channel comes with
an electrode wire & two electrode pads. Users can choose between the two output channels
by pressing the CHA button. Channel A&B are selected by default. Pressing the
will decrease & increase the intensity of stimulation. LCD screen display the left remaining
stimulation time in the lower left corner. The default time is 20 minutes.

3 Intended use

The MDTS100 Electronic Pulse Stimulator is intended for at home use in delivering electric
pulses to tired and sore muscles. These pulses to tired and generated by the device & delivered
through electrode pads placed on the targeted muscles.

4 Indications for use

The Electronic Pulse Stimulator MDTS100 is to be used for temporary relief of pain associated
with sore and aching muscles in the shoulder, waist, back, upper extremities (arm), and lower
extremities (leg) due to strain from exercise or normal household and work activities.

5 Contraindication

Consult your physician before purchasing or using this device if you have one of the following
conditions:
• Acute disease
• Malignant tumor
• Infective disease (i.e. HIV/AIDS, Pneumonia)
• Pregnant
• Heart disease
• High fever
• Abnormal blood pressure
• Lack of skin sensation
• Abnormal skin condition
• Any condition requiring the active supervision of a physician

6 Features of MDTS100

• Liquid Crystal Display (LCD) Screen
• 2 Independent Output Channels
• 7 Stimulation Modes (Mode 1, Mode 2, Mode 3, Mode 4, Mode 5, Mode 6 and Mode 7)
1
buttons