Administrator Features; Base Illustration - EnGenius DuraFon 1X Manuel D'instruction

a. Allow user to pre-program the most frequently used PBX feature
along with its feature code into DuraFon which is adjunct to the PBX
system
b. Up to 9 entries can be saved
c. Once the feature and feature codes being programmed, you can
quick perform those functions during the call by pressing
soft key.

Administrator Features

Handsets 11 and 12 are designated administrators. Both have the same
authority to perform base station administrative functions from their handset
menu selections. No password is required and to remember.
1. Supports both DTMF and Pulse dialing
a. From an administrator handset (Handset 11), press MENU-9-1 to
select Tone or Pulse dialing mode.
b. Default is Tone dialing.
2. Administrator programmable Flash key timing
a. From an administrator handset (Handset 11 or 12), press MENU-9-
2-4 to select flash key timing
b. 9-level (100 ms - 900 ms) timing selections, default= 600 ms.
c. The default value (600 ms) works in most areas. Changing this
setting may cause Flash key not working. Change only when you
are certain of the new value would work.
3. Call transfer to PBX extension
a. When install the DuraFon 1X behind the PBX system, you can pre-
program the feature code of call transfer function
b. Need to adjust the Flash time to match your PBX setting
OPTION
~15~

Base Illustration

~16~