Methods Of Operation - AFLAMO INSERT 3D NH Manuel D'utilisation

Operation
Read and understand this entire owner's manual, including all safety information,
before plugging in or using this product. Failure to do so could result in electric shock,
fire, serious injury, or death.
Power
Plug the power cord into a AC 220-240 Volt outlet (see IMPORTANT SAFETY INFORMATION on
Pages 2 and 3). Make sure the outlet is in good condition and that the plug is not loose. NEVER
exceed the maximum amperage for the circuit. DO NOT plug other appliances into the same circuit.

Methods of Operation

This electric fireplace can be operated ONLY by the REMOTE CONTROL.
Before operating, please review the IMPORTANT SAFETY INFORMATION on Pages 2, and heed all
warnings.
Remote Control Operation
BUTTON
ON: Enables control panel functions and
remote control. Turns on flame effect.
OFF: Disables control panel functions and
POWER
remote control. Turns off flame effect.
Flame speed button:Controls the speed
of the flame.There are 3 flame speed
settings: 01 (slowest), 02 (Medium),
03(fastest)
SPEED
Remote Control
FUNCTION
www.aflamo.com
ACTION & INDICATION
1. Press once. Indicator light turns on.
Power turns on. All functions enabled.
2. Press again. Flame effect turns off. Unit
goes to standby. All functions turn off.
1. Press once. Flame speed gets changing.
2. Press again until desired setting is
reached. Display shows the setting.
The Default setting is 03 (fastest)
9