Jensen BTM15 Guide D'utilisation Du Propriétaire page 6

Operation
Bluetooth operation is dependent upon your compatible head unit and
remote control. Operation specific to the BTM15 is listed below:
To answer an incoming call, press the TALK button on the BTM15.
To end a call, press the TALK button.
Using your BTM15 with a Jensen voice controlled head unit
There are two microphones built into the BTM15; one
microphone is for Bluetooth and the second is designed to be
used in conjunction with the PTT (Push To Talk) button found on
the Jensen voice control head units. When using the BTM15, the microphone that
was included with your voice control head unit is no longer needed and can be
removed. The "Talk" button is for Bluetooth only, not voice control.
As with all Bluetooth devices, some features are limited by the mobile phone's
compatibility. Please refer to the Owner's Manual that came with your head unit
for additional Bluetooth Operating Instructions and instructions specific to voice
control operations.
PAGE 4