Avanti MT12V0W Manuel D'instructions page 11

AUDIBLE SIGNALS
DURING OVEN SETTINGS
SETTING THE CLOCK
To select a 12 hour clock touch CLOCK pad
1.
once. Display will show HR 12
To select a 24 hour clock touch CLOCK pad
2.
once more. Display will show HR 24
Use the number pads to enter the correct time.
3.
If you selected 12 hour clock system, the digital
clock allows you to set from 1:00 to 12:59. If
you selected 24 hour clock system, the digital
clock allows you to set from 0:00 to 23:59.You
must touch at least three numbers to set the
clock (one for hour and two for minutes).
Touch CLOCK pad again.
4.
NOTE:
You can check the clock time while cooking is in
progress by touching the CLOCK pad.
EXPRESS COOK
Use the EXPRESS COOK buttons (1 – 6) for quick
start pre-timed cooking.
Number Cook Time
pad
1 1 Minute
2 2 Minutes
3 3 Minutes
4 4 Minutes
5 5 Minutes
6 6 Minutes
ADD 30 SECONDS
Touch this button for quick 30 second cook time.
Pressing this button during a set cook cycle will add
30 seconds to the current time.
Every time the button is pressed an additional 30
seconds will be added to the current cook time.
NOTE:
During the EXPRESS COOK, TIME COOK AND
TIME DEFROST, you can add 30 seconds each
time the button is pressed.
HOW TO SET THE OVEN CONTROLS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept the entry, check and try
again.
SETTING A COOKING PROGRAM
SETTING THE KITCHEN TIMER
Touch TIMER.
1.
Enter the amount of time by touching the
2.
number pads. Digit time is in minutes and
seconds and set left to right. Set one digit (a 5
for 5 seconds) or up to four digits (2405 for 24
minutes, 5 seconds).
Touch START/PAUSE.
3.
NOTE: Time countdown can be seen in display for
5 seconds before clock or cooking time is returned
to display.
Touch TIMER and then touch STOP / CLEAR
to cancel TIMER during timing process.
A. One-stage Cooking
Touch TIME COOK pad.
1. Use the number pads to set
a cooking time. You can set a
cooking time from one second to
99 minutes and 99 seconds.
2. If you want to set a
power level other than 100%
power, touch POWER, then use
the number pads to enter the
power level. You can set the
power level from 1 to 9.
Use single digits to set a cooking
power level:
B. Multi-stage Cooking
You can program oven for 2 cooking stages. Each stage
can be programmed with a different power level and
time. To program 2-stage, press the TIME COOK Button
select the desired time and press the POWER LEVEL
button to select the desired power, then press the TIME
COOK button to set the 2
Press START / PAUSE to begin the cook program.
The oven will automatically proceed to the end of
cooking stages.
NOTE: After stage 1 time has elapsed, one beep sound,
signaling the beginning of stage 2. After total time has
elapsed, 4 beeps sound and END appears in display.
Touch STOP/CLEAR pad or open oven door to clear END
before starting another cooking function.
11
Number Cooking
pad power
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
nd
stage cook time and power.