Troubleshooting - Bigben GAMETAB-ONE Notice D'utilisation

6. You can also adjust the sensitivity of the right stick using the star icons at the bottom of the menu. 1 star is the least
sensitive and 5 stars are the most sensitive. Adjust this to fi nd your preferred setting. 5 stars is the default setting.
7. 7. The direction pad can also be mapped using the circle icon with the four small circles with the triangles. The direction pad can also be mapped using the circle icon with the four small circles with the triangles.
8. 8. Once you are happy with your settings, press the 'Save \ Hide' option from the menu. The mapping controls and Once you are happy with your settings, press the 'Save \ Hide' option from the menu. The mapping controls and
menu will now disappear and you can play your game. Your mapping controls will be saved in memory.
Note: Now your settings are saved, when you will play the game again it will be not necessary to remap the controls.
9. If you need to reset the controls back to default, simply select the Clean \ Close option from the menu.
Note that the virtual on screen controls may disappear from the game screen during the mapping set up. If this occurs,
simply save and start again so you can fully complete you mapping. You will probably need to touch the screen again to
make the virtual controls appear again.
IMPORTANT: Some games will require that you play through a tutorial stage before you get access to all of the on-screen
virtual controls.
If you experience any control issues with the joysticks, deselect them from the mapping menu by selecting them and
removing the tick. This may solve your issue.

21. Troubleshooting

The GAMETAB-ONE
TM switches off during use.
- The battery level could be low, plug the AC adaptor for charging.
- Ensure that the sleep mode, (in the display settings), is not set to a short time period (i.e. 15 seconds).
The GAMETAB-ONE does not switch on
TM
- Press and hold the power button for 5 seconds.
- Connect the AC adaptor and press and hold the power button for 5 seconds. If the battery is fully discharged then it
could take several minutes before you can use the tablet.
I have connected the AC Adaptor but the GAMETAB-ONE
- Ensure that you have correctly connected the AC adaptor into the DC socket.
- The battery is fully discharged. It can take several minutes before you can use the tablet.
The image on my TV is not good when I am using a HDMI cable.
- Try to change the resolution of the HDMI output in the HDMI settings. If the selected resolution is not appropriate for
your TV screen - see paragraph 12. HDMI Output.
TM is not charging.
34