Assembly Overview - Homecraft CBG64 Instructions Et Recettes

ASSEMBLY OVERVIEW

Tap Handle
Tap Faucet
BASIC ASSEMBLY
1
Fasten the Dispenser Cap to the mouth
of the growler by threading the Beer
Hose into the mouth of the Growler, then
secure Cap by twisting clockwise.
If not already attached, screw the Beer Hose
into the bottom of the Dispenser Cap.
2
Lift up the collar at the bottom of the Regulator
(as shown), then lower and press onto the
receiver. Release the collar to complete the
connection. Gently pull up on the Regulator
to ensure the connection is secure.
3
If the Tap Handle is not already attached, screw
the Tap Handle clockwise onto the Tap Faucet.
7
Regulator
Connector
Dispenser Cap
Beer Hose
Dispenser Cap
Regulator
collar
receiver
Tap Handle
CO2 Cartridge
Regulator