Télécharger Imprimer la page

CYBEX SwitchView SC4 UAD Guide D'installation Rapide page 2

Publicité

Les langues disponibles

Les langues disponibles

QUICK INSTALLATION GUIDE
Mechanical
Approximate dimensions:
H x W x D = 1.8 in. [45.7 mm] X 11.0 in.
[279.4 mm] X 11.0 in [279.4 mm]
Weight = 4.9 lbs. (2.2 kg)
Video Modes: VGA, SVGA, XGA,
SXGA, UXGA, WVGA, WSVGA,
WXGA, WSXGA, WUXGA and HDTV
Maximum Resolution: Single link DVI up
to 1920 x 1200 @ 60 Hz (monitor and
video card support for the maximum
resolution will vary and should be verified
for compatibility)
Video Adaptors
The local port connectors and cable
connectors on the SC4 UAD switch
are DVI-I. Analog monitors require an
adaptor to connect to the VGA port
(VAD-27). Monitors with digital-only
connectors can be plugged directly into
the DVI-I connector on the SC4 UAD
switch.
To Contact Avocent Technical Support: Visit www.avocent.com
Avocent, the Avocent logo, Cybex and SwitchView are registered trademarks of Avocent Corporation or its affiliates in the U.S. and other countries. All other marks are the property of their respective owners. ©2010 Avocent Corporation.
SwitchView
SC4 UAD
®
Target Video Connectors
All of the target video connectors and
cable connectors on the SC4 UAD
switch are DVI-I. Target computers with
analog connectors require an adaptor
to connect to the VGA port (VAD-28).
Target computers with digital only
connectors must use an adaptor to
match up with the DVI-D port (VAD-31).
Cables
Users can choose from 6 ft. or 12 ft.
cables and select whether or not to use
audio (speakers and microphone).
Contact an Avocent representative for
ordering details.
4-Port DVI-I/USB Switch with Audio
590-609-616C

Publicité

loading