Connecting A Digital Sound Bar To Use Audio Return Channel (Arc) - Hisense U1600 Serie Mode D'emploi

ENGLISH FRANÇAIS

Connecting a digital sound bar to use Audio Return Channel (ARC)

If you'd like to use the Audio Return Channel (ARC) feature to have sound sent from the TV back down an HDMI cable
to a digital sound bar, then you will need to connect the cable to the HDMI / ARC port. By using this feature, you will
also be able to control the sound bar with your TV remote instead of using multiple remotes for each device.
To connect a digital sound bar with an HDMI cable (not provided):
1. Connect the cable that's attached to the sound bar to the HDMI / ARC port on the TV.
2. Turn on the sound bar by pressing the Power button.
3. Press the [ ] button on your remote and select the
4. Select the ARC option.
TV PORT
NOTES
• Only digital sound bars that require a wired connection are compatible with the TV.
• If the device has an Input Selector feature then make sure to change it to TV.
• 5.1 CH (channel) audio is available when the TV is connected to an external device that supports a 5.1 channel
surround sound. You can go to the Settings / Menu > Sound > Advanced settings > Digital audio out to select
Dolby Digital Plus to receive the 5.1 channel audio. You will need to also go into the sound or audio settings of
your device to ensure it is set to 5.1 Channel output. It may read 'Bitstream', 'RAW' or 'Digital'.
ESPAÑOL
Settings icon, then go to Sound > Speakers.
HDMI Cable
8
EXTERNAL DEVICE
Digital Sound Bar
Audio Amplifier