Technical Data - Hilti TE 30 Mode D'emploi

Designation
Metal drill bits / stepped drill bits
Mixing paddles with smooth shank
Designation
TPS Theft Protection System with
Company Card, Company Remote
and TPS‑K key
Dust removal system

4 Technical data

Right of technical changes reserved.
NOTE
The power tool is available in various voltage ratings. Please refer to the power tool's type identification plate for
details of its rated voltage and rated input power.
Power tool
Rated power input
Rated current input
Mains frequency
Power tool TE 30
Weight of power 4.0 kg (8.82 lb)
tool
Dimensions (L x W x 359 mm (14.13") x
H) 93 mm (3.66") x
213 mm (8.39")
Drilling speed with-
out hammering 2
Drilling speed with- 750/min
out hammering 1
Hammer drilling 750/min
speed
Single impact en- 3.3 J
ergy
Other information about the power tool
Chuck
Drilling dia. range in concrete/masonry
(hammer drilling)
Percussion core bits
Drilling dia. range in wood: solid bits
Drilling dia. range in metal
Protection class
Description
∅ 8...13 mm (³/₈ - ½"), (1st gear) hex. connection end
∅ 80...150 mm (3¹/₈ - 6"), (for mixing non-flammable ma-
terials)
Short designation
TE DRS‑S
TE 30 / TE 30‑AVR / TE 30‑C‑AVR
850 W
Rated voltage 120 V: 7.5 A
60 Hz
TE 30‑AVR
4.2 kg (9.26 lb)
379 mm (14.92") x
93 mm (3.66") x
213 mm (8.39")
750/min
750/min
3.3 J
TE‑C (SDS‑plus) / TE‑T (SDS Top)
5...28 mm (¼ - ¹/₈")
66...90 mm (2¾ - 3½")
5...20 mm (¼ - ¾")
Max. 13 mm (up to ½)
Protection class I (grounded) or
Protection class II (double insulated), see rating plate
Item number, description
206999, optional
TE 30‑M‑AVR
900 W
Rated voltage 120 V: 9.3 A
60 Hz
TE 30‑M‑AVR
TE 30‑C‑AVR
4.2 kg (9.26 lb) 4.4 kg (9.7 lb)
379 mm (14.92") x 379 mm (14.92") x
93 mm (3.66") x 93 mm (3.66") x
213 mm (8.39") 213 mm (8.39")
1,100/min
750/min 750/min
750/min 750/min
3.3 J 3.3 J
en
5