Technical Description; Control Elements; Installing The Coffee Maker - Dometic Perfect Coffee MC052 Instructions De Montage Et De Service

Technical description

6 Technical description
The coffee maker MC052 and MC054 is connected to a 12 Vg voltage source
(MC052) or a 24 Vg voltage source (MC054), e.g. to the on-board supply.
The voltage source used must be protected with a 20 A fuse. For more details on the
fuse check the vehicle documentation.
The permanent filter is made of plastic and can be removed for cleaning. The coffee
pot is made of glass.
A drip protection mechanism prevents water flowing out of the filter when the coffee
pot is removed from the appliance before brewing is complete.
The fastening is suitable for use while driving.
6.1

Control elements

No. in
fig. 2, Designation
page 3
1 Filter support with drip protection mechanism
2 Water tank with fill level indicator
3 Clip for holding the coffee pot
4 On/Off switch
The LED lights up when the coffee maker is switched on.
5 Coffee pot with side markings
7

Installing the coffee maker

!
CAUTION! Risk of injury
• Ensure that the appliance is firmly seated.
• Set up and fasten the appliance in such a way that it cannot tip over
or fall down.
• Make sure the airbag function is not impaired.
• Do not attach the appliance in an area where passengers could
knock their heads against it.
10
MC052, MC054
EN