Parameter Settings; Connection Examples; Single-Phase With Direct Current Measurement - Festo Powermeter EduTrainer 8108193 Notice D'utilisation

10 Parameter settings

The device is parameterized directly on the device.
It can be parameterized using the menu navigation via the keyboard on the front side or using a Web
browser via the Ethernet interface.
For detailed operating instructions, see the website of the measuring device manufacturer at
www.camillebauer.com SINEAX AM3000 (2018-08)

11 Connection examples

In this example, the load to be measured is a light.

11.1 Single-phase with direct current measurement

The 19 mm jumper plugs (4, 5) are used for direct current measurement
Maximum current for direct measurement is 5A per current measuring channel
Max. permissible nominal voltage is 300 V to protective ground
8108196
© Festo Didactic
CAUTION
Powermeter EduTrainer
®
37