LG AN-GXDV55 Manuel D'utilisation page 3

How to Assemble the Stand
• When assembling the stand, put the product on a table or a
flat floor with its screen facing downward. Here, first put a
soft and fluffy cloth on the place, and then put the product
on top of it to prevent the screen from being damaged.
• When assembling the stand, check if the screws are
completely fastened. (If they are not completely fastened,
the product may lean forward after being installed.) Avoid
fastening the screws with excessive force because otherwise
the joint part of the screws may be worn out, and the screws
might come off.
• When assembling the product, do not use foreign substances
(oil, lubricant, etc.) on the screws.
- It may cause damage to the product.
• Before installing a wall mount support, disassemble the
Stand by conducting the method to assemble the stand in a
reverse order.
1
Head
washer
2
1 2
3
4
5
6
3
x 4
M4 x L20
1
2
3
3