Airwell RC15-7ACEL1801 Mode D'emploi page 8

Operation instructions
The operation mode is determined by the difference between the indoor
Heat pump models
Indoor temperature
Below T-3℃(
≤T
T-3℃
indoor
O ver T+3℃(
Cooling only models
Indoor temperature
T+3℃( 3°F
O ver T+3℃(
SMART button is ineffective in SUPER mode.
ECONOMY button is ineffective in SMART mode.
Press MODE button cancel SMART mode.
Note: Temperature, airflow and direction are controlled automatically in SMART mode.
However, For the on/off, you can choose from -2 to 2 (for some models you can choose
from -7 to 7), for the inverter you can choose from -7 to 7. if you still feel uncomfortable.
What you can do in SMART mode?
Your feeling
Uncomfortable because
of unsuitable air flow
volume.
Uncomfortable because
of unsuitable flow
direction.
How to cancel the SMART mode?
Press the button.
Result : The SMART mode will be cancelled.
temperature and set temperature.
Operation mode
)
3°F HEATING
≤ )
T+3℃( 3°F FAN ONLY
)
3°F COOLING
Operation mode
) or below
FAN ONLY
COOLING
3°F)
Button
6
Target temperature
T
T
T
Target temperature
T
T
Adjust
Indoor fan speed alternates among Auto, Higher, High,
Medium, Low and Lower each time this button is
pressed.
Press it once, the vertical adjustment louver(horizontal
adjustment louver) swings to change vertical airflow
direction(horizontal airflow direction). Press it again,
swings stops.
PRESS