Description (Fig. A) - Petra 202041 Mode D'emploi

Congratulations!
You have purchased a Petra product.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this product
for many years.

Description (fig. A)

Your 202041 Petra slow juicer has been
designed for extracting juice from fruits and
vegetables. The appliance is suitable for indoor
use only. The appliance is suitable for domestic
use only.
1. On/off switch
2. Food processing unit
3. Food processing spiral
4. Cap (food processing unit)
5. Filling tray
6. Pusher
7. Juice jug
8. Pulp jug
9. Lock button (food processing unit)
10. Brush
11. Juice filter
12. Juice attachment
Initial use
Preparation
• Clean the appliance. Refer to the section
"Cleaning and maintenance".
• Clean the accessories. Refer to the section
"Cleaning and maintenance".
Assembly (fig. A - G)
Before you proceed, we need you to pay
attention to the following notes:
- Before assembly or disassembly, switch off
the appliance, remove the mains plug from
the wall socket and wait until the appliance
has cooled down.
• Fig. B: Mount the food processing unit (2)
to the appliance. Lock the food processing
unit (2) by turning it into the direction of
the lock symbol until the lock button (9)
clicks into place.
• Fig. C: Insert the food processing spiral (3)
into the food processing unit (2).
• Fig. D1: Mount the juice filter (11). Make
sure that the three clips align with the
three slots in the food processing unit.
• Fig. D2: Mount the cap (4). Lock the cap
(4) by turning it counterclockwise until it
clicks into place.
• Fig. D3: Mount the juice attachment (12).
Lock the juice attachment (12) by turning it
counterclockwise until it clicks into place.
• Fig. E: Place the juice jug (7) under the juice
outlet onto the bottom of the appliance.
• Fig. F: Place the pulp jug (8) under the pulp
outlet as close to the juice jug (7) as possible.
• Fig. G: Mount the filling tray (5) to the
food processing unit (2).
Use (fig. A)
Before you proceed, we need you to pay
attention to the following notes:
- Do not leave the appliance switched on
continuously for more than 10 minutes.
After 10 minutes, switch off the appliance
and allow it to cool down for 20-30 minutes
before switching it on again.
- The appliance will stop automatically after
20 minutes of continuous operation. Allow
the appliance to cool down for 20-30 minutes
before switching it on again.
- Do not insert your hands into the feeding
tube to press food ingredients. Always use
the pusher. Do not exert too much pressure
on the pusher.
- If the appliance starts to vibrate strongly,
switch off the appliance and subsequently
clean the juice filter.
Before you proceed, we would like you to
focus your attention on the following notes:
- Only operate the appliance when the juice
jug is placed under the juice outlet. Regularly
empty the juice jug when processing larger
quantities of fruit or vegetables. Empty the
juice jug when it is full.
- Only operate the appliance when the pulp
jug is placed under the pulp outlet. Regularly
empty the pulp jug when processing larger
quantities of fruit or vegetables. Empty the
pulp jug when it is full.
6