Safety Instructions - Algam Lighting DMX-WR Mode D'emploi

Thank you for choosing one of our Algam Lighting products. Please read this user manual carefully and follow
the instructions to avoid danger or damage to the unit due to mishandling. Keep this user guide for future
reference.

SAFETY INSTRUCTIONS

The symbols shown above are internationally accepted symbols that warn of potential hazards with electrical
products.
if one of those symbols is on your product , please read carrefully the following:
WARNING !
Before use, and before installing this fixture, read carefully user manual, and follow the safety precautions
listed on this page.
WARNING !
Very high level light output. DO NOT LOOK INTO THE BEAM.
DANGER !
Hazardous voltage, Risk of electric shock!
ALWAYS disconnect the fixture from power for servicing, for cleaning or installing. Do not connect this unit on
a dimmer power pack.
Protect the unit from rain or moisture.
WARNING !
Burn Hazard. Do not touch. Very hot surface.
The fixture becomes hot during use and remains hot 10 min after use. Do not touch the unit.
WARNING !
Fire Hazard!
Keep flammable materials away from the fixture. Do not operate the fixture with ambient temperature over
4O°C.
DANGER !
Safety Hazard. Risk of injury.