Overhead Rigging - Algam Lighting S900 Mode D'emploi

OVERHEAD RIGGING

Attention!
installation
required
installation materials should be used, the installed device should be inspected regularly for
safety.
Make sure the area below the installation
rigging, de-rigging and servicing.
Locate the fixture in a well ventilated spot, far away from any flammable materials and/or
liquids. The fixture must be fixed at least 20cm from surrounding walls
The device should be installed out of reach of people and outside areas where persons
may walk by or be seated.
The device should be well fixed; a free swinging mounting is dangerous
considered!
Do not cover any ventilation opening as this may result in overheating
Before the first time use, it must be inspected by professional
inspection regularly every year.
Before rigging make sure that installation area can hold the 10 times weight of device. Using
the steel rope which can hold 12 times weight of device, through the eye-bolt
hang installment.
Be careful when filling the fluid tank. First of all, unplug the mains lead! Then unscrew the cap on the tank
and fill it .
Installation and Use
- Unpack the fog machine.
- Fill the fluid tank by means of a funnel.
- Plug the unit into a mains outlet.
- Switch the unit ON.Depending on the room temperature, it takes about 4-5 minutes until the working
temperature is reached. Then the thermostat is clicking and the LED on the manual control lights up.
Once the smoke machine has reached its working temperature (the LED is lit) the smoke machine can
produce continuously fog during about 1 minute.
After this period of time, the fog generator is cooled so much down that the thermostat switches off. Wait a
few minutes until the working temperature is reached again.
Location
Select a location where it is easy to fill the tank. It is also possible to hang the unit by means of the
supplied holder and fixing screws.
The installation must be carried out by qualified service personal only. Improper
can result in serious injuries and /or damage to property.
extensive experience! Working load limits
place is free from unwanted
Overhead
should be respected,
persons during
and may not be
staff to make sure safety,
for assisting
rigging
Certified