Panasonic CF-VEB521 Série Instructions D'utilisation page 8

Connecting/Disconnecting
CAUTION
Do not connect or disconnect the port replicator while the computer is powered on or in
the sleep (Windows Vista), standby (Windows XP) or hibernation mode.
Connecting
Power off the computer, and disconnect all cables
1
from the computer.
Connect the plug of the AC adaptor that came with
2
the computer to the DC-IN jack of the port replicator
and plug the other end into an AC outlet.
E
CAUTION
Refer to the "Operating Instructions" accompanying computer for informa-
tion on proper handling of the AC adaptor and AC cord.
3
Slide the computer onto the port replicator, align the
back of the computer with the back of the port
replicator, and then slowly lower the computer to con-
nect the expansion bus connector.
CAUTION
Do not connect the computer to a port replicator while the computer is con-
nected to the AC adaptor or other cables.
Do not attempt to make connections if there is any object between the com-
puter and the port replicator. Doing so could damage the computer and the
port replicator.
8