Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
ASSEMBLY
Frame assembly
Please prepare a spacious area for installation, and put a shipping blanket
on the area to prevent scratches on the floor and the frame. Loosen the hex
head screws that fix the adjustable junction, but don't completely take out
the screws.
NOTE: The drawings of the crossbar are the backside of the components.
Please make sure the crossbar keep facing down while installation, which is
convenient for the further steps.
Retighten all the hex head screws to finish the adjustment.
18
Publicité
Table des Matières
