Table des Matières
Publicité
Parallel—One Speaker (dual 2 ohm voice coils)
One dual 2 ohm voice coil woofer with voice coils in parallel results in a 1 ohm load
to the amplifier.
Figure 3
Figura 3
Abbildung 3
1. Connect the speaker in parallel by connecting the two positive (+) terminals
together and the two negative (-) terminals together.
2. Wire the positive (+) terminals of the woofer to the positive (+) terminal on the
amplifier. Wire the negative (-) terminals of the woofer to the negative (-) terminal
on the amp.
© 2012 MD Audio Engineering. All rights reserved.
-
-
+
+
+
-
7
Publicité
Table des Matières
