Additional Features; One Button Scan - Braun SlideScan 6000 Mode D'emploi

Additional features

manual Control Panel
a. You can advance or reverse the slide by pressing the navigation button
or and scan manually with the scan button
function.
Manual Control Panel
Please note:
When installing your new scanner onto a Windows system that already has an-
other usB Flatbed scanner or all-in-one scan/Copier/Printer device installed, it may be necessary
for you to disconnect the other scanner from the usB port for the Film scanner to work properly,

One Button scan

open the CyberView X 5.0 driver program First and press the scan button to scan
the film or slide.
a. open the CyberView X 5.0. (ref. page 23 to acquire theCyberView X 5.0
driver program)
1. select the film type and resolution.
2. Press the scan button ( ), the scanner software will automatically display
a pop up setting window as below.
2-1. select the scan to directory, file format (tiF or JPG)
3. Press the scanner button ( ) until you are requested to input the amount
that you want to scan to file. release the button then select the "ok" in
the next window that appears on the screen.
3-1. if "to Host" is selected, the slide will be scanned, sending the data
to the opened application software.
3-2. if "to File" is selected, the slide will be scanned, saving the data to
the preset path.
14
b. select "start > Programs >CyberView X 5.0_ms" and select "CyberView X 5.0"
to enable one button scan
nOTE:
c. slide Viewer
to open theCyberView X 5.0 application
1. select the film type and resolution you want to scan.
1-1. Press the scan button and it will pop-up the "save to File" settings
window. input the save to path, file name and file type. (ref. Pg.11 to
change the settings)
1-2. after setting up, click "ok" to scan the image to file.
1-3. Press the scan button until you are requested to input the qty. that
you want to scan to file then release, then push the "ok" to get to the
next setting window.
if you do not open CyberViewX 5.0 First, the scan button will not function.
the scanner has a built in mini light panel which allows the slides to be man-
ually previewed with a backlight before inserting into the tray for scanning.
insert the slide into the slide viewer for previewing. the scanner has to be
switched on. Gently press down on the top of the slide to engage the back
light for viewing the slide.
Mini Light Panel
15