Braun SlideScan 6000 Mode D'emploi page 6

loading slide(s) into the magazine
CS Magazine
a. locate the numbering sequence text on the Cs slide magazine indicating the
slide order. the numbers should be facing up and starting from the left.
b. Hold the slide right side up, facing forward so the image is not reversed.
rotate the slide as illustrated and insert each slide, one at a time, into the
magazine.
Numbering
loading slide(s) into the magazine
PaximatS Magazine
a. locate the numbering sequence text on the top of the Paximat slide maga-
zine indicating the slide order. the numbers should be facing up and starting
from the left.
b. Hold the slide right side up, facing forward so the image is not
reversed. rotate the slide as illustrated below (180 deg) and insert each slide,
one at a time, into the magazine.
10
CS Magazine
Numbering
Paximat Magazine
loading slide(s) into the magazine
Universal Magazine
a. locate the numbering sequence text on the top of
the universal slide magazine indicating the slide
order. the numbers should be facing up and start-
ing from the left.
b. Hold the slide right side up, facing forward so the
image is not
reversed. rotate the slide as illustrated below (180
deg) and insert each slide, one at a time, into the
magazine.
Universal Magazine
load magazine into the scanner
nOTE: For all magazines (except for the universal magazine)
return the orange adapter to its original position at the grip of the slide
•
transport arm after scanning.
to release the adapter, gently press its outer tip.
•
a. remove the cover from scanner exposing the slide magazine loading area.
b. load the magazine into the scanner as illustrated below.
note:
orientation of scanner in the diagrams is from the back of the unit. take note of the
magazine slide opening also facing towards the back of the scanner for correct orientation when
loading into the scanner.
general Recommendations:
Braun Paximat s (especially for cardboard frames and framed slides up to
•
1/16 inch thickness.
Paximat magazine for framed slides up to 1/8 inch thickness.
•
Cs magazine for Cs/Cs2-framed slides.
•
Numbering
11