König CSBTSP110 Mode D'emploi page 2

View/functions
On/Off switch
Indicator light
Bluetooth® connection
- After the power is switched on, the blue light begins to flash. Search for
new Bluetooth® devices with your Bluetooth® enabled device. When the
speaker is found, its name will appear on the screen.
- Enter the password "0000" and the speaker will be paired with your device.
- The password is required only when the devices are paired the first time.
After that the speaker will be automatically paired with your device when
both devices are switched on.
AUX connection
- Insert the attached cable into the AUX port of the speaker. The other end
can be plugged into your PC or music player. Now you can control all the
settings of the speaker from your PC or music player.
- Don't use the AUX mode when you are using Bluetooth®.
Charge
- Charge the speaker when it is powered off. Insert the mini USB end of the
attached USB power cable into the Charge port of the speaker.
- Plug the other end of the USB power cable into your PC or you can use a
separate USB power adapter (not included).
- After the speaker is fully charged, the red indicator will be off.
Charge port/AUX
2
ENGLISH