Program A Temporary Pin - Number Of Openings - Chamberlain 940EV Mode D'emploi

Programming

PROGRAM A TEMPORARY PIN - NUMBER OF OPENINGS

NOTE: This feature is not available on garage door openers that have a green Learn button or an external receiver.
A temporary 4-digit PIN can be programmed to allow access to visitors. Each programmed PIN can program one temporary PIN. The temporary PIN
can be set for a number of hours or a number of door openings. The temporary PIN cannot be the same as any previously programmed PIN.
1 Enter any programmed
PIN, then press and hold
the * button until the
garage door opener light
bulb flashes 3 times.
2 Enter the temporary 4-digit
PIN of your choice, then
press the button.
ENTER
The garage door opener
light bulb will flash 4
times.
Press the number of
3
openings the temporary
PIN will work (up to 255).
Then press the button.
#
The garage door opener
light bulb will flash once.
4 To test, press the
temporary PIN, then press
the ENTER button. The
garage door opener will
activate. If the temporary
PIN was set for a number
of openings, the test will
use up one opening.
6