Program A Temporary Pin - Number Of Hours - Chamberlain 940EV Mode D'emploi

Programming

PROGRAM A TEMPORARY PIN - NUMBER OF HOURS

NOTE: This feature is not available on garage door openers that have a green Learn button or an external receiver.
A temporary 4-digit PIN can be programmed to allow access to visitors. Each programmed PIN can program one temporary PIN. The temporary PIN
can be set for a number of hours or a number of door openings. The temporary PIN cannot be the same as any previously programmed PIN.
1 Enter any programmed
PIN, then press and hold
the * button until the
garage door opener light
bulb flashes 3 times.
2 Enter the temporary 4-digit
PIN of your choice, then
press the * button. The
garage door opener light
bulb will flash 4 times.
3 Press the number of
hours the temporary PIN
will work (up to 255).
Then press the button.
*
The garage door opener
light bulb will flash once.
4 To test, press the
temporary PIN, then press
the ENTER button. The
garage door opener will
activate.
5