MIGHTY SEVEN SG-400 Mode D'emploi page 3

Warning:
1. To prevent grease leakage, make sure to wrap a few turns of thread seal tape around the connecting
thread on the outlet tube before connecting it to the main housing.
2. While mounting the grease cartridge onto the grease gun, the pressure relief valve should be depressed
al the way till the grease cartridge being tightened firmly.
3. To avoid the risk of damage, the recommended working pressure / air source should not exceed
10.34 Bar (150psi).
4. While replacing a new grease cartridge, make sure the rim dimension of it should be less than 54.8mm.
5. Follow all the recycling laws of waste disposal once this tool is no longer usable.
3