GRAUPNER heim 47G Mode D'emploi page 28

Liability exclusion / Compensation
As manufacturers, we at GRAUPNER are not in a position to influence the way you build
and set up the model, nor how you install, operate and maintain the radio control system
components. For this reason we are obliged to deny all liability for loss, damage or costs
which are incurred due to the incompetent or incorrect use and operation of our prod-
ucts, or which are connected with such operation in any way.
Unless otherwise prescribed by binding law, the obligation of the GRAUPNER company
to pay compensation, regardless of the legal argument employed, is limited to the invoice
value of that quantity of GRAUPNER products which was immediately and directly
involved in the event which caused the damage. This does not apply if GRAUPNER is
found to be subject to unlimited liability according to binding legal regulation on account
of deliberate or gross negligence.
Contents
• Foreword .........................................
• Warnings .........................................
• How the coaxial counter-rotating system works .............
• The "4 in 1" control box ...............................
• Installation ........................................
• Charging of the LiPO battery pack .......................
• Before Flying .......................................
• The first flight of your helicopter .........................
• Exploded View .....................................
• Sparepart Packs ....................................
The instructions
We have invested considerable effort in producing these instructions, with the aim of ensuring
that your model helicopter will fly reliably and safely. Please take the trouble to follow the
instructions step by step, exactly as described, as this guarantees a successful outcome. This
applies to you whether you are a relative beginner or an experienced expert.
• The comprehensive illustrations show the procedure; be sure to read the instructions which
accompany the drawings.
• All gears, bearings and moving joints must be greased or oiled carefully.
• You will find sparepart packs and exploded view of the model at the end of these instructions.
28
micro 47G
indoor
P.2
P.3
P.7
P.8
P.9
P.10
P.10
P.15
P.16
P.17