Operation - Use - Bestron AHD200P Mode D'emploi

operAtion - general information
The appliance is intended only for domestic use, not for professional use.
1. Mouthpiece
2. Diffuser
3. "cool shot" switch
4. Heat switch 1-2-3
operAtion - before use for the first time
1. Remove the packaging.
2. C lean all the accessories to remove any residues that may be left from the manufacturing process (see
"Cleaning and maintenance").
T he appliance may emit a little smoke and a characteristic smell when you switch it on for the first time.
This is normal and will stop on its own. Make sure there is sufficient ventilation.

operAtion - Use

1. Make sure that the On/Off switch of the appliance is set to 0 (Off).
2. Insert the plug in the wall socket.
3. Put the On/Off switch (5) on 1. Or for a harder blow power on 2.
4. Adjust the heat with the heat switch (4).
I = cold
II = tepid
III = hot
• I n case of real wet hear, it is better to start
with drying on a higher level. Switch the
hair dryer on to a less hot level as the hair
become dryer.
• T o give your hair more volume, you can
use the diffuser. Rotate in a circular motion
over your skin until the hair is almost dry.
• D ry your hair in front of the mirror is often a
difficult task. Just try without looking in the
mirror. Bend your head a little bit forward
so you can see what your doing. You will
see, it works quite good!
3
1
2
8
6
5
4
7
5. On/off switch 0-1-2
6. Grid
7. Hang up loop
8. Power cord and plug
16
instruction manual