Virutex RMV70U Mode D'emploi page 11

E N G L I S H
RMV70U FRAME TRIMMER
Important
Read these OPERATING INSTRUCTIONS
and the attached GENERAL SAFETY
INSTRUCTIONS LEAFLET carefully before
using the machine. Make sure you have
understood them before operating the
machine for the first time.
Keep both sets of instructions for any
future queries.
1. SPECIFICATIONS
Universal motor.................................................50-60 Hz
Input power.................................................................1700 W
No-load speed........................................................6500/min
Recommended maximum cutting depth per pass.....34 mm
Max. cutting depth with saw blade............68 mm
Machine weight w/ equipment for cutting windows..6.6 Kg
Total case weight.............................................................29 Kg
Weighted equivalent continuous acoustic pressure level
A.........................................................................................91 dBA
Acoustic power level A.................................102 dBA
Uncertainty......................................................................K = 3 dbA
Wear ear protection!
Vibration total values.................................................a
Uncertainty....................................................................K: 1.5 m/s
2. SAFETY INSTRUCTIONS FOR
USING THE MACHINE
Before plugging in the machine, ensure that the power
supply voltage corresponds to what is stated on the
machine's characteristics plate.
Danger, keep hands clear of the working area.
Do not grasp the underside of the machine while it
is running.
Ensure that the machine slides back freely without
getting stuck. Never block the recoil mechanism.
When replacing the saw blade, only genuine blades
should be used.
Do not use saw blades that are warped or damaged. Do
not use blades made of self-hardening steel.
Unplug the machine from the electrical outlet before
performing any maintenance operations.
When changing tools or carrying out any other operation
near the cutting head, take your hand off the on/off
lever and unplug the machine from the mains.
Always wear eye and hearing protection when working
with the machine.
Wear close-fitting work gear, leather gloves in your
own size, and safety footwear. Do not wear jewellery,
scarves, ties, open work coats or other similar garments.
To prevent the saw blade teeth breaking, make sure that
the piece you are going to cut contains no nails, screws
or other metal parts.
Do not use the trimmer without ensuring that it is
correctly attached to its stand.
Ensure that the longitudinal guide is correctly attached
to the frame.
Never use the machine where there are liquids or
excessive moisture.
When changing tools or carrying out any other operation
near the cutting chain, take your hand away from the
on/off lever and unplug the machine from the mains.
SPARE PARTS: Only use genuine spare parts.
3. STANDARD EQUIPMENT
The box contains the following items:
RMV70U Trimming Machine
RMV70U Guide
5 mm Allen key.
3 mm Allen key.
6 mm Allen key.
8 mm Allen key.
A/f service key: 13
Dust collection tube set 7045832.
Hard metal saw blade D.200 12Z assembled.
Hard metal saw blade D.200 30Z for nails (optional
accessory)
Metal detector
: 3.8 m/s Front auxiliary handgrip
2
h
Full front fence
2
Operating instructions and miscellaneous documen-
tation.
4. GENERAL DESCRIPTION OF
THE RMV70U FRAME TRIMMER
The RMV70U trimmer, when used with the RMV70U guide
that comes with the machine, is the perfect machine for
cutting door frames up to 68 mm thick. Its hard metal
saw blade and the practicality of the guide bar on which
the machine is installed enable it to make very precise
cuts with an impeccable finish.
When used separately without the guide, the RMV70U
trimmer permits easy trimming of old wood window
frames and crossbeams for renovation. Its great precision
makes it possible to install new window battens directly
on the cut made, with no need for filler blocks or wedges.
It may also be used to trim the bottoms of doors, frames
and skirting boards, when installing parquet or carpet,
for trimming shadow joints, for cutting ventilation
windows in doors, walls and panels made from wood,
11