Buffalo Tools HTRACKC Instructions De Montage Et D'utilisation page 6

H
1
2
FIG 11 FIG 12
Step 7
Position the Center Bar (11) onto the Front or Rear Side Kits, and attach with 2 piece bolts, flat
washers, nuts (E). Fig 13. and Fig 14.
Note: The center bar is adjustable and can be placed anywhere along the length
of the Side Kit.
11
FIG 14
FIG 13
E
Step 8
Install the Left Front Mounting Foot (6) to the Bottom of the Front Upstand. Bolt them together using
2 piece bolts, 4 piece flat washers, 2 piece spring washers, and nuts. Fig 15 and Fig 16.
Note: All of the lips of the Mounting Feet must face towards the inside of the
truck bed.
Repeat above step to the other three mounting feet. Remember do not tighten any bolts.
4L
Flat washer
Flat washer
6
Spring washer
FIG 15 FIG 16
6
HTRACKC Horizontal Truck Rack