Overview; Unpacking; Assembling - Optika Italy OPTIKAM WiFi Manuel D'instructions

5.

Overview

WIFI ANTENNA
6.

Unpacking

The device is housed in a moulded Styrofoam container. Remove the tape from the edge of the container and
lift the top half of the container. Take some care to avoid that the optical items (objectives and eyepieces) fall out
and get damaged.
Do not touch with bare hands optical surfaces such as lenses, filters or glasses. Traces of grease or
other residuals may deteriorate the final image quality and corrode the optics surface in a short time.
7.

Assembling

Once opened the camera box, the parts are the following:
① Camera body + antenna
② Power supply
③ USB cable
④ Stage micrometer
OPERATING LED
③
④
⑤
⑥
USB SOCKET
①
②
⑧
⑦
⑤ Projection lens
⑥ 30 mm reduction ring
⑦ 30,5 mm reduction ring
⑧ "C" mount additional ring
Page 4
POWER SUPPLY
SOCKET
CAMERA BODY