Camera Connection To Android; Advanced Settings - Optika Italy OPTIKAM WiFi Manuel D'instructions

13.3 Camera connection to Android

To connect Android device please download from the Google Play the following app:
SimpleMjpegView
https://play.google.com/store/apps/details?id=com.tk.android.simplemjpeg
Please note that the camera can be detected by using this parameters only:

14. Advanced settings

The camera is shipped from the factory with default settings for the WiFi connection.
In order to ensure a fast frame rate, when used under WiFi condition, the resolution is set at 640x480.
However it is possible to change these default settings, although it is not advisable to do this.
Should the user needs to change settings accordinlgy to personal needs, please contact our Technical Dept. for
the operative instructions.
Page 14