Usage Instructions; Cleaning And Maintenance - Sonnenkonig BILLY Mode D'emploi

GB

3 Usage instructions

• Connect the plug to the socket at the bottom of the heated vest and the other end to an
electricity supply (AC220-240V). Make sure that there is a power socket nearby and that the
power cable is not in a position where the user may trip over it.
• To pre-heat the overblanket, select the third setting for 15 minutes. The temperature will
gradually rise.
• After pre-heating, turn the control button to the heat setting you require.
• To turn the device off, turn the button to the 'OFF' position.
Note: The heated overblanket features a safety mechanism to protect against overheating,
and is set to run continuously for 90 minutes. If you wish to extend that time, it is advisable
to let the heated overblanket cool down for 5 minutes before using it again.

4 Cleaning and maintenance

Follow the instructions below when you are not using the electric heated overblanket and before
cleaning it:
• Make sure the control button is in the 'OFF' position.
• Disconnect the power supply.
• Disconnect the plug linking the control to the device.
• Let the heated overblanket cool down before cleaning.
48