Dion-Ag F6113T940 Instructions D'assemblage page 8

Instructions d'installation/ Installation instructions : F6113T940
Ensemble Adaptateur F61 / Adapter kit F61 : GEHL K26190

Loosen the tightener rod (7) to close the space between the rod and the support (6).

Insert the spring (8) and compress it to a length of 19 to 22mm (3/4 à 7/8''). Tighten
well the nuts against each other (9).

Adjust the tension of the tightener until the gap between the nut and the support (6)
reaches a maximum of 1,5mm (1/16''). Tighten the locking nut (7). See the operator's
manual to adjust the chain tension.
Step 4: Installation of the right mating hands

Install the right mating hand (10) on the frame as shown using 1/2" x 1" bolts (10)
and flange nuts (12).
22 janvier 2013