Service Indicator - Webasto Frigo Top 10 I-ES Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

3.14 Service indicator

The control element indicates when service is necessary.
The service interval is based on the total operating hours
of the refrigeration system.
The service indicator does not indicate:
■ malfunction of the system,
■ service necessary based on mileage,
■ annually necessary service.
More information about service is available in
"Service handbook and system data" sup-
plied with the system.
The clock symbol starts flashing when service
is necessary in less than 100 operating
hours.
When the total service interval has passed then the dis-
play shows:
■ "SE" flashing for 10 sec. at start-up,
■ The clock symbol lights continuously.
Fig. 02:
Service necessary
X
Make sure to service the system at a Webasto service
partner.
After the service has been carried out your Webasto ser-
vice partner will reset the service interval counter and
sign the Service handbook.
Frigo Top | Pordoi | Rolle
3.15 Hours of compressor operation
There is a counter (in hours) that saves the compressor
operation hour count. The resolution is 1 hour and the
range goes from 0 to 50.000 hours. Saving interval:
5 min.
X
Press the "Clock" button:
– The compressor operation count, in
hours, appears on the display. The first
value displayed indicates the thousands.
X
Press the "CLOCK" button again:
– The units of the compressor operation
count appears on the display; preceded
by a minus sign.
Example:
If the saved value is 1511 hours of operation, the first
time the button is pressed "001" (thousands) is dis-
played. The second time the "Clock" button is pressed
"-511" (units) is displayed.
Fig. 03:
"Thousands" indication
Fig. 04:
"Units" indication
Repeatedly pressing the "Clock" button toggles between
the two values.
During display of the compressor operating hours only
the "Clock" LED remains on.
When no key is pressed for 3 s, the instrument goes
back to normal display.
The user cannot reset the saved value. Only
Webasto can reset it, using a special reset
procedure.
6

Publicité

Table des Matières
loading

Table des Matières