all-clad TJ802D50 Guide De L'utilisateur page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

16. Do not attempt to remove food when toaster is plugged in.
17. WARNING - To prevent electric shock, unplug before cleaning.
SAVE THESE INSTRUCTIONS.
D O
• The toaster must always be used in the upright position (not on its side or tilted forward or back).
• Before each use, make sure that the Crumb tray (G) is in its proper location.
• Regularly remove crumbs from Crumb tray (G).
• The Toasting lever (C) must be in the raised position before plugging in or unplugging from an outlet.
• If bread jams in the slots after toasting, the unit will automatically shut off. Unplug immediately from the
outlet and wait for the toaster to cool before attempting to remove the bread.
• Unplug the toaster if it shows any working abnormalities.
DO NOT
• Never leave the toaster unattended during operation, particularly when toasting for the first time or when
changing settings.
• Do not touch the metal parts or hot surfaces of the appliance when it is working.
• Do not try to toast breads with ingredients that melt or drip in the toaster (iced breads or stuffed breads)
and do not toast very small pieces of bread or croutons as this may damage the appliance or cause a fire.
• Do not toast breads thicker than 1 inch in the toasting slots.
• Bread can burn; do not cover this appliance while in use and do not use this appliance near any flammable
materials such as curtains, under shelving or wall cupboards, etc.
• Do not put paper towels, cardboard or plastic in, on or under the toaster.
EN
5

Publicité

Chapitres

Table des Matières
loading

Produits Connexes pour all-clad TJ802D50

Ce manuel est également adapté pour:

Tj804d50

Table des Matières