Dismantling instructions before wash:
Take the inner bag of polystyrene balls out of the neck compartment. Do not wash!
1.
2.
Take the inner bags of plastic balls out of the two neck wings.
3.
Take the inner bags of plastic balls out of the two side wings.
4.
Take the seat cushion off of the chair and unzip the cloth cover of plastic balls and the
incontinence cover.
5.
Take the three inner bags out of the back pillow (one with plastic balls and two with
polystyrene balls). NB! Do not wash the two inner bags of polystyrene balls!
6.
Zip up and take off the chair cover.
7.
All zippers should be zipped up before the chair cover is washed.
DK
Assembly after wash:
1.
Put the seat cover on the chair and zip it up.
GB
2.
Place the inner bag of polystyrene balls in the neck compartment.
3.
Place the inner bags of plastic balls in the two neck wings and zip closed. DON'T FORGET
to secure the wings with Velcro.
DE
Place the inner bags of plastic balls in the two side wings and zip closed. DON'T FORGET
4.
to secure the wings with Velcro.
5.
Affix the seat cushion to the incontinence cover and cloth cover with plastic balls and zip
FI
closed.
6.
Place the seat cushion in the chair.
7.
Place the three inner bags inside of the back pillow's three compartments (one with plastic
FR
balls, two with polystyrene balls). IMPORTANT! Place the bag of polystyrene balls in
the top compartment. Place the bag of plastic balls in the middle compartment
and the other bag of polystyrene balls in the bottom compartment.
NL
8.
Affix the back pillow under the neck cushion with Velcro.
Accessories
SE
Protac SenSit
The Protac SenSit
ES
Straight.
Using the accessory
IT
12
Puff
®
Puff can be used as a foot/leg rest, together with the Protac SenSit
®
The Protac SenSit
Puff can be used as a
foot/leg rest, together
with the Protac SenSit
Straight.
The Protac SenSit
can be used as a stool.
®
®
Puff
®
®