Important - Montarbo DTRIX15 Manuel D'instructions

DTRIX15
digitally controlled integrated system

Important !

Product care and maintenance:
• Always keep air vents unobstructed so air can circulate freely.
Otherwise, electronic components may overheat and suffer
damages. To ensure proper ventilation, place the subwoofer a
sufficient distance away from walls and make sure it isn't covered
by curtains and similar. This is vital to keep the power amps cool.
• Never expose the enclosures to direct sunlight, excessive
vibrations or mechanical shocks.
• Never place burning candles or other sources of open flame on
top of the device.
• Do not expose the enclosures to heat sources (lamps, lights, high
power light sources, radiators or other products that produce heat).
• Avoid operating and storing the system in damp or dusty places:
this may lead to malfunctions and premature degrading
of specifications.
• Avoid using the system close to strong sources of electromagnetic
interferences (e.g. video monitors, high power electrical cabling).
This may lead to degradation of audio quality.
• When setting up the system up outdoors, be sure to protect it
against rain.
• Care should be taken so that objects do not fall and liquid is not
spilled onto the enclosures. In public event don't let people,
musicians, technicians or anyone put glasses, cups, ashtrays or
cigarettes on the enclosures.
• Always leave the protective grid mounted on the enclosures.
• Use a soft brush or a jet of air to clean the enclosure.
Do not use alcohol, solvents or detergents.
Waste from Electrical and Electronic Equipment
Attention !
The crossed out wheeled bin symbol that can be found on this product means that the product is covered by the Waste from Electrical and Electronic Equipment Directive.
The symbol is intended to indicate that waste from electrical and electronic equipment must be subject to a selective collection.
For more details on available collection facilities please contact your local government office or the retailer where you purchased this product.
The solid bar underneath indicates that the product has been put on the market after 13th August 2005.
INFORMATION ON PROPER DISPOSAL
Information on Disposal for Users (private households)
In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment should not be disposed of via the
normal household waste stream but must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*.
In some countries* your local retailer may also take back your old product free of charge if you purchase a similar new one. *Please contact your local authority for further details.
In other Countries outside the EU: If you wish to dispose of this product, please contact your local authorities and ask for the correct method of disposal.
In Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don't purchase a new product. Further collection facilities are listed on the
homepage of www.swico.ch or www.sens.ch.
Information on Disposal for Professional Users
In the European Union If the product is used for business purposes and you want to discard it: please contact your Montarbo dealer who will inform you about the take-back of the product.
You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities.
In Spain: Please contact the established collection system or your local authority for takeback of your used products.
In other Countries outside the EU: please contact your local authorities and ask for the correct method of disposal.
18
ENGLISH
• Take care of the connecting cables. Make sure that they are not
damaged, knotted or twisted.
• Do not force connectors and controls.
• Always make sure that the mixer and the powered
enclosures are switched off before connecting them.
This will to avoid annoying noises and signal peaks, which
can also be dangerous for the enclosures themselves.
• The DTRIX15 system should always be switched on last after
powering up all the equipment connected to it, while it
should be switched off first before powering off all the
equipment connected to it.
• As long as it is plugged in there can be dangerous electrical
potentials inside the device, so, before undertaking any sort of
maintenance work etc., always make sure it has been unplugged
from the mains socket.
Power supply connection:
• Make sure the mains power switch is off ('0') before starting
any connection.
• Check that mains voltage corresponds to the voltage indicated
on the panel.
• Use only the factory supplied mains cable or, if a different plug
style is needed, a suitable cable with a ground connection and
marked with the safety approvals valid in the country of use.
• Leave enough room to get to the mains power socket and the
mains connector on the back panel.
As long as it is plugged in there can be dangerous electrical
potentials inside the device, even when the mains switch is in the
'0' (off) position and the power indicator is off so, before
undertaking any sort of maintenance work etc., always make
sure it has been unplugged from the mains socket