Archos 43 internet tablet Guide D'utilisation page 6

CONNECTING TO THE WIFI
www
First of all, you need to configure a WiFi network. For this procedure to work, you need to be in a WiFi zone that will allow
you to connect to it. Every time the ARCHOS is in range of a network that you have already configured once, it will attempt
to make a connection.
1
To configure a new WiFi network, go on the Home screen, tap on the Menu icon
Settings
2 In the screen, select
Tap on the network you want to connect to. Then tap inside the
4
board appear. We recommend that you select
Enter the required network information*, tap on
5
tempt to establish a connection to that WiFi access point with the network parameters you entered.
* For free access WiFi points, there is no need to enter any special information. For secured networks, you will need either a key (a series of numbers and/or letters)
of the type WEP, WPA, or WPA2. Check with the person who manages the WiFi network to obtain the exact connection parameters required.
4 ► Consult the full Manual to learn more about the Internet configuration.
QSG_A43_IT_PN109854_book.indd 4
Wireless & networks
.
If the WiFi is off, tap on the
3
will scan for available WiFi networks and display them at the bottom of the screen.
Show password , to be able to see the characters you are typing.
Done , and then tap on
, then select
Wi-Fi
line to turn it on. Then select
Wireless password
field to make the virtual key-
Connect . Your ARCHOS will now at-
Settings .
Wi-Fi settings
. The ARCHOS
13/06/2011 17:11:10