Archos 43 internet tablet Guide D'utilisation page 5

STARTING UP
Charging the Battery
Before using your ARCHOS for the first time, completely charge the battery:
Connect the supplied USB cable to the ARCHOS and to a running computer. The ARCHOS device
1
will turn on and start charging.
Tap on Charge Only
2
charging. It will blink when the battery is charged. Note: You can still use the device while charging its
battery (if you tap on "Charge Only").
Startup Wizard
The first time you start up your ARCHOS, the installation wizard will bring you through a few screens to help you set up the
principal settings: Language, country, time, etc.
Transferring files to your ARCHOS
Connect the supplied USB cable to the ARCHOS and to a running computer. The ARCHOS will turn on and ask you if you
1
want to connect it. Tap on
You can transfer your media files to the ARCHOS either by copy/pasting them into the respective folders using Windows®
2
Explorer (or the Finder on a Mac®), or by using Windows Media® Player (
Once all your file transfers are finished, close Windows® Explorer and any other program that may have read or written to
3
the ARCHOS. Click on the 'safely remove' icon in the system tray, next to the clock. You can now unplug the USB cable.
► See the full user manual to learn how to fully configure your ARCHOS device.
QSG_A43_IT_PN109854_book.indd 3
. The charging indicator light (right side of the device) is on when the battery is
Mount
to connect it. Within a few seconds the ARCHOS will appear as an icon on your computer.
Sync tab).
USB
3
13/06/2011 17:11:09